Can You Nail Into Masonry

Masonry materials such as bricks and stone are all unremarkably used to build structures in and around our homes. This is for several reasons: these materials are durable, they create a pleasing artful, they're low maintenance, and they can stand up to the test of fourth dimension. However, brick and stone tin pose some challenges when it comes to things like hanging decorative objects or completing other household and DIY projects that require nailing into the wall. Hither's a full tutorial to help you acquire how to nail into masonry successfully and with ease, whether you have a stone or brick wall.

Brick Surface

Pace i - Mark the Spot

Using a pencil, marking the spot where yous'd like to blast. Yous should choose an surface area between bricks where the joints are located, since nailing directly into a brick could cause cracks or the material to shatter.

Step 2 - Drill a Pigsty

Next, select a masonry drill bit slightly smaller than the diameter of the smash shaft you're using. Where you've marked the advisable spot, drill a hole into the joint with the selected fleck. Be sure to clothing protective goggles during this step for your safe.

Step 3 - Install the Nail

Now it's fourth dimension to add together the masonry nail into the hole. Place information technology in the desired spot and hammer it into place, taking intendance to keep the nail straight. It should penetrate the joint nearly one and a quarter of an inch.

Footstep 4 - Test Your Work

Once the smash has been hammered in, pull down on it to ensure that it's been installed firmly into the joint.

If you're wondering what to do with the boom hole should yous end upwards eventually removing the nail, simply fill the surface area with masonry repair filler and the spot will await adept equally new!

Stone

Nailing into stone tin can seem like a claiming, just information technology's actually easy to do. Perhaps yous desire to add nails to your beautiful rock hearth for your Christmas stockings, or maybe you're simply looking to hang some pictures. Whatever the case may be, just follow the steps beneath and this project will exist done in no time.

Step 1 - Drill a Hole

Just as we discussed above, you lot'll need to use item tools for this project. Using your drill, enlist the assist of those trusty masonry bits for this chore. Drill your hole to fit the size of the hardware you'll be installing. Typically, pictures require a hole somewhere in the range of 3/16 to 5/16 of an inch in diameter. Drill your hole in the mortar joints that exist between the stones equally opposed to directly on the stone.

Stride two - Install Hardware

Next, push your metal or plastic anchor into the created hole. This hardware should fit securely and shouldn't be able to twist or plough once information technology'due south inserted. Heavier decorations require metal hardware, while items that are lighter will be held well with plastic. When in dubiety, opt for the metallic hardware!

At present, it's time to add in a screw as well every bit a picture hook attached into the ballast. The screw should be 1 size smaller than the ballast and it should exist left protruding out slightly from the rock wall to allow for hanging.

Step iii - Hang Your Detail

Now that the hole is set up and the hardware has been installed, gently hang your pictures or decoration as desired and give yourself a chance to admire your own handiwork!

While it may have originally seemed similar a alpine chore to embed nails into the masonry of your dwelling, it'south an easy process that is not much more complex than hanging nails into other surfaces. Masonry work is always beautiful, but brand it fifty-fifty more than special by installing your favorite domicile decor!

Source: https://www.doityourself.com/stry/how-to-nail-into-masonry

Posted by: walkerhavoing.blogspot.com